YAESU FT897

* TX Frequency Coverage: 160-10 Meters, 50 MHz, 144 MHz, 430-450 MHz, plus Alaska Emergency Chan. (5167.5 kHz).
* RX Frequency Coverage: 100 kHz-56 MHz; 76-154 MHz; 420 - 470 MHz. (Exact frequency range may be slightly different)
* Power Output: 100 watts HF-6M, 50 watts 2 M, 20 watts 70 cm. (20 watts on battery)
* Operating Modes: USB, LSB, CW, AM, FM, W-FM, Digital (AFSK), Packet (1200/9600 FM).
* Digital Modes: RTTY, PSK31-U, PSK31-L, and User defined USB/LSB (SSTV, Pactor, etc.).
* U.S. Weather Band reception.
* Built-in 3-Message Memory Keyer.
* Multi-Color LCD Multi-function Display.
* Bar-Graph Metering of Power Output, ALC, SWR, Modulation.
* Optional Narrow CW and SSB Filters.
* AGC Fast-Slow-Auto-Off Selection.
* RF Gain/Squelch Control/IF Control.
* Built-in Noise Blanker.
* AM and FM broadcast reception.
* Dual VFOs, Split Capability, IF Shift, and R.I.T. ("Clarifier").
* Wide/Narrow FM Selection.
* AM Aircraft Reception.
* Dedicated SSB-based Digital Mode for PSK31 on USB/LSB, AFSK RTTY, etc.
* Built-in CW Electronic Keyer and Semi-Break-In.
* Transverter Interface Jack.
* Built-in VOX.
* Carry Handle.
* Built-in CTCSS and DCS.
* ARTS™ (Auto-Range Transponder System).
* Smart Search™ Automatic Memory Loading System.
* Spectrum Scope.
* 200 Regular Memories, plus Home Channels and Band-Limit (PMS) Memories.
* Alpha-Numeric Labeling of Memory Channels.
* Automatic Power-Off (APO) and Tx Time-Out Timer (TOT) Features.
* CAT System Computer Control Capability Cloning Capability.

YAESU AT897 Antenna tuner

If you own a Yaesu FT-897 and want a broad range automatic antenna tuner, look no further! The AT-897 Autotuner mounts on the side of your FT-897 just like the original equipment. We even added the ability to mount the "feet" on the side of the tuner so when you are transporting your rig by the handle, you can safely set it down and not worry about scratching the case. 

The AT-897 is microprocessor controlled and features the tuning ability our customers have come to expect from our products. The tuner has a front panel button to initiate the tuning sequence and will bypass the tuner if pressed momentarily. The red LED lights during while the tuner is active. 

For tuning you will change your mode to one which provides a constant carrier (AM, FM, CW, or Packet), key your transmitter, press the tune button, wait for the tuner to tune, then un-key. 

The AT-897 takes power directly from the CAT port of the FT-897 and provides a second CAT port on the back of the tuner so if you are using another CAT device, hooking it up couldn't be easier. 

If you are a QRP enthusiast or plan on operating via internal batteries, the AT-897 is your tuner! The AT-897 does not need a fan, let alone one that is constantly running. Current consumption when it is tuned is in the micro-amp range. Since we use latching relays, you can even remove power from the tuner after you have tuned on the band you are going to operate! 

The FT-897 is a great radio. The FT-897 / AT-897 combination makes a fantastic shack! 

 | Specifications |

YAESU FT 897 + AT 897 Antenna tuner