Dismantling and Restoration.
This is at the railway station in Stavanger, immediately after its arrival from
the States, big moment, had to fight it a little with a start problem, low on power,
so no big deal.

So after a short trouble shooting, it started with the most beautiful sound.

 

 

Repair now in progress, several areas are now repaired it's time to
start adjusting, and installing inner sill and floors but first there is hundreds
of holes to drill, I do not own a point welder so I have desided to drill holes and
Mig weld in each hole, that also gives me the best control over every welded point.

I counted for fun the numbers of holes in one inner sill, over 200, so my arm
still ache. Now planning to installing inner sill !!!
Floor and inner sill and stiffeners in place, went very well, The Martin Robey
parts had almost perfect fit, only minor problems.
 
Outer Sill in place, Looks good. Car turned upside down,
in the Jig, except for that, same thing as previous picture,
Outer sill in place these components too had very good
fit as well, only smallproblems, Starting to look as a car again.
 
 
 
Than a giant step forward
 
 


Yes, One beautiful baby.

Home