Ternary diagram plot - Triangular Phase Drawing Program
Ternary diagram Plot - Download Software
Ternary Diagram Plot - Introduction
A Ternary Diagram Plot are in chemistry used for depicting chemical
compositions - phase diagrams.
These diagrams are three-dimensional but is illustrated in
two-dimensions for ease of drawing and interpretation.
In a ternary diagram the relative percentage
(normally weight %) of three components are represented
by A, B and C.
The only requirement is that the three components have to sum to 100%.
If they don't, you have to normalize them to 100%.
Fig. Ternary Diagram Plotter
Data Entry - Ternary phase diagram plotter
Both symbol and text can be inserted in
CHEMIX ternary diagrams. A and B can only be
inserted as %. Text fragments in which may follow the
numbers A and B must only partly contain numbers
e.g. 10 10 L1 where L1 is the text fragment.
Data Entry Commands: There are fouor commands that can
be inserted in the end of each text string, these are:
[sf]=small font, [bf]=big font,
[-s]=hide symbol and [-t]=hide.
Examples:
20 50 Comment[-t] Symbol only (no text)
30 40 Text Only[-s] Text only (no symbol)
20 50 Text Only[sf] Small Font
30 30 Text Only[bf] Big Font
40 40 Big Text Only[-s][bf] Big Font (no symbol)
20 50 Comment[-t] Symbol only (no text)
40 40 Text Only[-s][-t] Absolutely nothing (no symbol and no text)
Text Insertion:
Insert two numbers (A and B normally weight %)
and text representing a phase (e.g. L1) separated by spaces. Because L1 is not a number
it will be identified as text in which always must be placed
after the two numbers A and
B e.g. 20 35 L1 (A=20% , B=35% Text=L1).
Negative numbers are not allowed. C will be calculated as
C=100%-A-B. The sum (A+B) must not exceed 100%.
Calculate: After inserting or changing the content in the
A(%) B(%) Text-field, you have to re-calculate
Legend: Insert legend text in this field.
Splines: Spline points may be created interactively by clicking
the mouse pointer (cross) within the triangular area (making blue lined rectangles). First
and last point
may be connected by selecting connect.
You may move spline points by hand. Simply locate the mouse pointer
within a blue lined rectangular area, click the left mouse button
and move the mouse pointer/rectangle.
Spline points may be removed by clicking the right mouse button with
the mouse pointer located within a blue lined rectangular area.
10 independent set of splines each containing up to 50 spline points
may be selected/created from the splines - drop down selection
box.
Delete all spline points from the selected spline set by the push
button Delete.
Software for Chemistry - Home